5.
Unscrew the lower pin and remove
the spacer and refit them on the
opposite side
Housing dimensions
Height
Depth
Width
Instructions for total built-in
Apply joint the sealing strip as
shown in figure.
Fit the appliance in the niche by
making sure that it stands against
the interior surface of the unit on
the side where the door hinges of
the appliances are fitted. Insert the
appliance until the upper strip butts
up against the unit (1) and make
sure that the lower hinge is in line
with the surface of the unit (2).
58
1780 mm
550 mm
560 mm
D765
D023
2