Troubleshooting - EINHELL STE 2000 Bedienungsanleitung

Anleitung STE 2000_SPK1:Anleitung STE 3500 SPK1

16. Troubleshooting

Fault
Engine does not start
Generator has too little or no
voltage
08.02.2007
Cause
Automatic oil cut-out has not res-
ponded
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air filter dirty
14:01 Uhr Seite 15
GB
Remedy
Check the oil level, top up with
engine oil
Refuel
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the filter
15