Convenient Functions; Playing In The Desired Order (Programmed Play) - Pioneer DV-2240 Bedienungsanleitung

Playable discs and files
Supported audio file formats
• This player does not support VBR (Variable Bit
Rate) and lossless encoding.
Windows Media™ Audio (WMA)
Sampling frequencies: 32 kHz, 44.1 kHz and
•
48 kHz
• Bit rate: Up to 192 kbps
• This player supports files encoded using Windows
Media Player Ver. 7/7.1, Windows Media Player for
Windows XP and Windows Media Player 9 Series.
• Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
This product includes technology owned by
•
Microsoft Corporation and cannot be used or
distributed without a license from Microsoft
Licensing, Inc.
MPEG-1 Audio Layer 3 (MP3)
• Sampling frequencies: 32 kHz, 44.1 kHz and
48 kHz
Playable file extensions
Video files
.divx .avi
• Files not containing DivX video signals cannot be
played, even if they have the extension ".avi".
Image files
.jpg .jpeg
Audio files
.wma .mp3
6

Convenient functions

Playing in the desired order
(Programmed Play)
1
Display the Play Mode screen.
Select Play Mode from HOME MENU screen.
2
Select Program.
Use / to select, then press ENTER or .
3
Select Create/Edit.
Use / to select, then press ENTER.
• The Create/Edit screen differs according to
the disc or file.
4
Select the title, chapter, track or file.
Use / / / to select, then press ENTER.
• To add to a program, first select the place in
the program (the program step), next select the
title, chapter, track or file then press ENTER
(files are added at the end of program).
• Press RETURN to return to the previous screen.
If you return to the previous screen when
inputting it, the settings you have programmed
are cleared.
• To delete a step, highlight it and press CLEAR.
5
Start playback.
Press  PLAY.
• To play the program, select Playback Start
from the program screen, then press ENTER.
• To resume normal playback, select Playback
Stop from the program screen, then press
ENTER. The program remains in the memory.
• To cancel the entire program, select Program
Delete from the program screen, then press
ENTER.
NOTE
Programs can be played repeatedly. Select
•
Program Repeat from Repeat on the Play Mode
screen during programmed playback.
Programs cannot be played in random order
•
(random play is not possible during programmed
play).
Playing files on USB
devices (DV-2242)
• The player may not recognize the USB device,
play files or supply power to the USB device. For
details, see When a USB device is connected
on page 9.
• Pioneer does not support that all files recorded
on all USB devices will play or that power will be
supplied to the USB device. Also note that Pioneer
will accept no responsibility whatsoever for loss
of files on USB devices caused by connection to
this player.
1
Switch to USB mode.
Press DVD/USB.
2
Connect the USB device.
Connect the USB device to the USB port on the
front panel (page 4).
The Disc Navigator appears automatically.
3
Start playback.
Use / / / to select the file, then press
ENTER.
• Turn the power off before removing the USB
device.
• To return to DVD mode, press DVD/USB or
 OPEN/CLOSE.
Copying files on to USB
devices (DV-2242)
Files stored on the discs can be copied on to the USB
device through the player.
1
Display the Disc Navigator screen.
Press MENU.
• Press  STOP to stop playback if the file is
being played.
2
Select the file.
Use / / / to select, then press .
3
Start copying.
Use / to select Yes, then press ENTER.
The file copying process will appear on the
screen.
NOTE
Do not operate any buttons during the file copying
•
process.
• A folder named "PIONEER" is automatically created
on the USB device. The copied files are stored in
this folder.