Operation - Sharp SJ-MB300S Bedienungsanleitung

OPERATION

Controlling temperature
The refrigerator controls its temperature automatically.
However, if needed, adjust the temperature as follows.
Refrigerator compartment
• It is set to 3°C at first.
• Adjustable between 0°C and 6°C in steps of 1°C.
1
Press the select button and
select the icon shown in the
figure.
The number indicates the
current preset temperature.
2
Press button or button
and select the desired
temperature.
The indicator moves tied to the
preset temperature.
(increase) (decrease)
It returns to the normal display
in approx. 15 seconds.
(The temperature display and
the indicator goes out.)
TEMPERATURE INDICATOR
This refrigerator is provided with a temperature indicator in the refrigerator compartment to allow you to control the
average temperature in the coldest zone.
Coldest zone
The symbol indicates the coldest zone in the refrigerator compartment.
(The door pocket positioned at the same height as the symbol isn't the coldest zone.)
Checking the temperature in the coldest zone
You can carry out regular checks to ensure the temperature in the
coldest zone is correct and, if necessary, adjust the refrigerator
temp. control.
To maintain a correct temperature inside the appliance, check that
the temperature indicator is always BLUE.
If the temperature indicator turns WHITE, the temperature is too
high; in this case, increase the refrigerator temp. control setting
and wait for 6 hours before checking the indicator of temperature
again.
NOTE
•
The internal temperature of the refrigerator depends on various
factors such as the ambient temperature of the room, the amount of
food stored and the frequency of door opening.
•
When fresh food has been introduced or the door has been left open
for some time, it is normal for the indicator of temperature to turn WHITE.
Freezer compartment
• It is set to -18°C at first.
• Adjustable between -22°C and -14°C in steps of 1°C.
1
Press the select button and
select the icon shown in the
figure.
The number indicates the
current preset temperature.
Blinking
2
Press button or
and select the desired
temperature.
The indicator moves tied to the
preset temperature.
(increase)
It returns to the normal display
in approx. 15 seconds.
(The temperature display and
the indicator goes out.)
Correct setting
button
(decrease)
Symbol
WHITE
BLUE
Temperature too high,
adjust the refrigerator
temp. control.
Blinking
5