Setting The Input Image Scaling - Panasonic AW-HS50E Bedienungsanleitung

2. Input/output signal settings
[10.3] Input Menu/SDI-IN3
10. UC:Mvdet/Sharp
[10.4] Input Menu/SDI-IN4
10. UC:Mvdet/Sharp
Mvdet: This is used to set the motion detection sensitivity of
the image.
12345
Toward still images Standard
Sharp: This is used to enhance the sharpness of the image
edges.
12345
Not sharp edges Standard

2-1-8. Setting the input image scaling

This is used to set the scaling for the DVI-D input signal
images.
Listed below are the resolutions of the images which can be
input.
Toward moving images
Very sharp edges
Select the scaling method from among the options listed
below.
30 (E)
[10.5] Input Menu/DVI-IN
4. Scale
Resolutions supported
1024  768/60 Hz
XGA
1280  768/60 Hz
WXGA
1280  1024/60 Hz
SXGA
1680  1050/60 Hz
WSXGA+
1600  1200/60 Hz
UXGA
1920  1200/60 Hz
WUXGA
1920  1080/59.94 Hz
1080/59.94p
1920  1080/50 Hz
1080/50p
Fit-V The aspect ratio of the input image is
maintained, and the size of the image is
enlarged or reduced in accordance with the
vertical resolution.
Fit-H The aspect ratio of the input image is
maintained, and the size of the image is
enlarged or reduced in accordance with the
horizontal resolution.
FULL The size of the image is enlarged or reduced in
accordance with the system resolution.
  The aspect ratio of the image is not
maintained.
  The enlargement and reduction ratios
differ between the horizontal and vertical
directions.
 For details on which sizes are supported for which
formats, refer to "Table of DVI input scaling sizes" on
the next page.