Pinp (Picture In Picture); Selecting The Pinp Material; Pinp Transition - Panasonic AW-HS50E Bedienungsanleitung

1. Basic operations

1-4. PinP (picture in picture)

This function involves combining another image with the
background image.

1-4-1. Selecting the PinP material

Select the PinP material using the B bus crosspoint buttons.
1
Press the PinP button to establish the bus
selection mode for the crosspoint buttons.
The indicator of the PinP button blinks.
2
Select the PinP signal using the B bus
crosspoint buttons.
3
Press the PinP button to release the bus
selection mode for the crosspoint buttons.
1, 3
AUX PinP KEY-F/S MIX
BUS DELEGATION TRANSITION TYPE
KEY-S
AUX
PGM PVW KEY OUT CLN
1 6 2 7 3 8 4
KEY-F
PinP
AUX
2
WIPE PinP ON KEY ON FTB ON
A
SHIFT
MV CUT
9 5 10
B
SHIFT
AUTO
BKGD

1-4-2. PinP transition

When the PinP button is pressed, the PinP image transitions
(fades in) for the transition duration which has been set.
<Setting the transition duration>
[1] TIME/CBGD Menu
2. PinP Time
  The transition duration can also be changed by turning
the OSD/TIME dial while pressing the PinP button.
When the PinP button is held down, the duration setting
is displayed on the OSD menu so that the setting can
now be changed while checking what is displayed.
The PinP transition can also be initiated by operating the
slide lever.
<Selecting the slide lever operation>
[13] Operation Menu
7. Slide Lever
16 (E)