Adding Salt - Swim & Fun Easy Salt 30 m2 Bedienungsanleitung

Stabilizer level
(cyanuric acid)
Free chlorine rate
Be careful: Non-compliance with these recommendations will involve inevitably a misuse of the de-
vice which entails the annulation of warranty.
Be careful with natural water sources!
Well water can contain a number of different metals, that can lower the performance of
the devise – and result in discolored pool water. Preferably use water from the public
water supply. Avoid using any water from natural sources (rain, run off water, reservoirs,
and wells)

4.2 Adding salt

Salt type: high purity pellet salt in compliance with the standard EN 16401 Quality A (without any
flowability agent and anti-caking agent).
Ideal salt level at the early season = 4 kg/m
Starting up: salt quantity (kg) = 4 x the volume of the pool in cubic meter (m
48
Stabilized between 7.0 and 7.4
Important: What ever the system of the chemical process, the efficiency of
the chlorine decreases very quickly with the increase of the pH and the scale
deposits appear faster as the pH rate is high or unstable.
To maintain pH in the recommended range, only use a pH corrective product
(acid or basic) advised by your professional. We recommend our Easy Ph
automatic regulatator (Art. 1815).
pH
Less than 35 ppm
Important: The role of the stabilising agent or cyanuric acid is to protect the
chlorine from the decompositioning effects of UV. A too high rate however, will
result in locing the disinfecting effect of the chlorine produced by the device,
thus making it inefficient. Lower the level of stabilizing agent in your pool by
adding fresh water.
More than 1 ppm (mg/l). If necessary, make a chlorination shock.
.
3
MV-1810-03-2018 . © All rights reserved Swim & Fun Scandinavia ApS
UK
).
3