Packing List; Installation - Swim & Fun Easy Salt 30 m2 Bedienungsanleitung

UK
2

PACKING LIST

A) EasySalt electronic unit
B) 1 chlorinator cell
C) Fitting kit
D) 2 hose connector sets with 50/63 mm adapter
E) 2 Hose clamps
F) 2 Strips
A)
3

INSTALLATION

Important
Before proceeding with the installation of the device, it is very important to check the
following points:
Ensure that any hydraulic equipment is in good working order and is correctly sized. In
particular, check the flow of the filtration pump, the capacity of the filter and the diame-
ter of the waterworks.
The maximum pressure of the water in the cell must not exceed 3 bars.
The device's treatment capacity should be adapted to the volume of water to be treated
and to the climate of installation. In case of warm climate, or in case of using well water,
a device designed to treat a volume of 30 m
family swimming pool of 20 m
The assembly of the devices (according to the model) must be performed strictly in
compliance with the following layout diagram.
The system must be shut off when the water temperature reaches below +15°C. Any
use under this temperature entails accelerated wear of the cell and entails the annulati-
on of warranty. Simply turn off the power.
MV-1810-03-2018 . © All rights reserved Swim & Fun Scandinavia ApS
B) C)
.
3
D)
in moderate climate must be limited to a
3
REMEMBER
GLUE
E)
F)
45