Diagram 1: flexible pipe mounting ø 38
1) place the 2 hose clamps on the hose
2) stick the 2 flutted tips on the cells
3) connect the pipe and the tip together thanks to the hose clamps
Diagram 2 : rigid pipe mounting ø 50
1) abrade the end of the hose with sandpaper on about 2 cm.
2) stick directly the hose on the cell with good PVC glue
46
Please see below dia-
gram 1 or diagram 2 for
more information
MV-1810-03-2018 . © All rights reserved Swim & Fun Scandinavia ApS
UK