miniland baby digimonitor 2.4" plus Bedienungsanleitung Seite 36

ENGLISH
4. Press UP /DOWN
to "1" for a baby that sleeps peacefully and cries quietly and "3" if the baby tends to make noise
while sleeping or makes fairly loud noises before actually crying, or set it to "2" level if you
consider that your baby's behavior does not fit either of the two previous patterns.
5. Press key to save the setting.
6. Press the Menu/Back
7. VOX icon (F) will be displayed at the top of the LCD screen.
Note 1: The VOX will remain off when in DUAL mode.
Note 2: If the device is in VOX mode and you do not wish to wait 1, 3 or 5 minutes for the screen
to turn itself off, press the ON button (12) to turn it on immediately.
5.2.9.3. LULLABIES
You can soothe the baby to sleep by playing a gentle lullaby from the baby unit. To activate this
function:
1. Press the Menu/Back
2. Press the UP key or DOWN
key enter into the sub-menu.
3. Press UP or DOWN
reproduction (default OFF).
4. When you have selected the tune, press the
the UP / DOWN
press the key.
5. Press the Menu/Back
6. Lullaby icon (E) will be displayed at the top of the LCD screen.
Keep in mind that the configuration of the lullabies will take place only on the camera that is being
watched in that moment.
Note: Lullaby loop function plays in cycle all the lullabies;
5.2.10. ALERT SETTING
5.2.10.1. FEEDING ALERT
5.2.10.1.1. FEEDING ALERT SETTING
To set the feeding alert, follow the next instructions:
1. Press the Feeding alert key
be displayed.
2. Press the LEFT
3. Press UP or DOWN
DOWN key to count down).
4. Press key to run the timer or press Menu/Back
If you want to remove the alarm:
1. Press the Feeding alert key
be displayed;
2. Press the LEFT
4. Press key to confirm.
Note: Once the feeding timer is running, a milk bottle icon (I) will be displayed on the LCD
screen.
key to select the VOX option: OFF/1/2/3 (default OFF). Set sensitivity
key twice to return to the main screen.
key and the menu will pop up.
key until the lullaby
key to select one of the 5 available lullabies, silence or loop
key to select the level of volume from 1 to 5 (the pre-set level is 2) and
key twice to return to the main screen.
then press the Menu/Back
or RIGHT key to select ON.
key to setting the alarm time (press UP
then press the Menu/Back
or RIGHT key to select OFF.
icon is highlighted then press RIGHT
key and the volume control will appear. Press
key, feeding setting screen will
key to exit without setting the alarm.
key, feeding setting screen will
36
key to increment; press