Chauvin Arnoux F11N Bedienungsanleitung Seite 18

6 Rotary switch
To select ON/OFF and the basic functions.
7 Display
LCD - 4000 counts (height 12.5mm) - All the symbols and
functions are shown on the display, except
F11N.
MAX : The max value function is on.
HOLD : The memory function is on.
: low battery indication.

: indicates that the clamp is operating as an ohmmeter.
A : indicates that the clamp is operating as an ammeter.
V : indicates that the clamp is operating as a voltmeter.
~ : indicates that the clamp is measuring an AC
voltage or current
... : indicates that the clamp is measuring a DC voltage.
: indicates that the clamp is operating in «diode test».
OL : is displayed to indicate a calibre overload.
 For the F13N only
RMS : rms measurement.
kHz : frequency.
: continuity sound test. NB : symbol no displayed
on the F11N.
8 Input terminals
Two O 4mm safety terminals for measurement of voltage,
resistances, continuity, diodes and frequency (F13N).
Black marked "COM".
Red marked " + ".
Standard gap : 19mm.
9 Three marks indicate the reference position of the
conductor inside the magnetic circuit.
 Function specifi c to the F13N
X Hz : frequency
This function is accessible via the rotary switch.
for the
18