«Aqua Prima» Water Filter - Saeco Talea Touch Bedienungsanleitung

«AQUA PRIMA» WATER FILTER
To improve the quality of the water you use, and extend the life of your machine at the same time, it is
must be replaced.
1
Remove the „Aqua Prima" water
date of the current month.
4
Place a container beneath the hot
water spout.
7
on off
reload water
Fill the water tank if necessary.
2
Press down until it clicks into place.
5
1.2 machine settings
alerts and
language &
acoustic
display
settings
cup-warming
water
surface settings
Access programming (see page
18 and 19). Press "water settings".
8
Have you replaced the old water
Press the
3
Fill the tank with fresh drinking
the full tank for 30 minutes for a
correct initialization.
6
1.2.4 water settings
rinse
on 39
water
hardness
3/4
9
Turn the knob until the
position is reached. Water
dispensing begins.
7
).