Sony FWD-32B1 Bedienungsanleitung Seite 59

Parts Description
8AC IN socket Connect the supplied AC power cord to this socket and to a wall outlet (page 20).
Once you connect the AC power cord and turn on main power switch, the
lights up in red and the display goes into the standby mode.
/ (main power) switch Turn the main power switch to "ON"(press the side) when setting up the display.
9
When the main power switch is turned "OFF" (press the
is 0W.
0 SPEAKER socket Connect the speakers SS-SPG02 (not supplied) to this socket. For more details on
(FWD-55B2/46B2/42B2) connecting the speakers, see the operating manual that came with the speakers. For details
on how to route the speaker cords, see page 21.
qa AUDIO OUT (L/R) This is the audio monitor output terminal for external devices. Outputs an audio of the
(RCA connector) signal currently indicated on the screen.
Notes
• Settings assigned in "Sound Mode" or "Speaker Out" will not be reflected.
• The noise reduction status set by the remote control is not reflected.
qs VIDEO VIDEO IN (BNC): Connects to the video output of a piece of video equipment.
VIDEO OUT (BNC): Connects to the video input of a piece of video equipment. Pictures
input from VIDEO IN will be output. Output regardless of whether the power is on or off
(including standby).
AUDIO IN (Stereo mini jack): Connects to the audio output of a piece of video
equipment.
1 indicator
side), the power consumption
GB
13 GB