Sony FWD-32B1 Bedienungsanleitung Seite 58

Parts Description
1 Mounting bracket Screw holes conforming to VESA standard.
installation holes Pitch: 200 mm × 200 mm (FWD-32B1)
400 mm × 400 mm (FWD-55B2/46B2/42B2)
Note
Use screws with the proper thread and length, and tighten to the proper torque.
Diameter of thread: M6
Thread length: 10 mm
Torque: 20 kgf·cm
2 Speaker installation holes For attaching the speakers SS-SPG02 (not supplied).
(FWD-55B2/46B2/42B2)
2 Internal speakers
(FWD-32B1)
3 Tabletop stand installation For attaching the tabletop stand SU-S02 (not supplied).
holes
4 1 (POWER) button Switches the display on or off (standby).
Operate when the main power switch is "ON" ( side).
5 INPUT/ Press to select a signal to be input from the INPUT connector.
(ENTER)
button The signal to be input switches as follows each time you press the INPUT button.
Video
Press to set your choice.
6 +/–/F/f (volume/menu Press to control speaker volume. When the menu is displayed, press to select the menu
item selection) button item or set a value.
Press to set your choice.
7 MENU/ Press to show menus.
(RETURN)
button This returns to the preceding menu screen.
12 GB
HD15 DVI HDMI