Before First Use; Preparing For Use; Using The Appliance - Concept ES 1000 Bedienungsanleitung

USER MANUAL

Before first use

1. Remove all package materials from the appliance.
2. Thoroughly clean the parts that come into contact with food before you use the appliance for the first
time (see chapter "Cleaning").

Preparing for use

1. Let hot ingredients cool down before you process them (max. temperature 80ºC/175ºF).
2. Cut the ingredients into pieces that fit into the feeding tube. Make sure that the pieces are not too big
to prevent them from getting stuck in the tube.
3. Put the appliance on a flat and stable surface.
4. Put the bowl with a spout (11) on the body with a motor (13) and turn it clockwise until it clicks.
5. Place the disc holder (10) in the bowl with a spout.
6. Place the disc you want to use on the disc holder (8 or 9).
The cutting edges are very sharp. Do not touch them!
7. Put the lid with a feeding tube (2) on the bowl with a spout. Turn the lid clockwise until it clicks.
8. Put the power cord in the wall socket.

Using the appliance

The grater discs are intended for slicking and grating vegetables such as cucumber, carrots, potatoes,
leeks and onions and also certain kinds of cheese. The julienne noodles disc (5) is intended for
cutting vegetables into thin sticks. The French fries disc is intended for cutting potatoes into fries.
Never process hard ingredients like ice cubes with the appliance.
The cutting edges are very sharp. Do not touch them!
1. Turn the control knob to position 1.
2. Put the ingredients in the feeding tube.
Precut the ingredients into smaller pieces that fit in the feeding tube. Fill the feeding tube evenly for the
best results.
If you want to grate cheese like Parmesan, Gouda or Emmental, it should be chilled to a refrigerator
temperature.
3. Put the pusher (1) onto the ingredients in the feeding tube and push down lightly.
DO NOT operate the unit continuously for more than 2 minutes. Allow the motor to rest for 5 minutes
before using again. After three cycles, allow the unit to cool completely before using again.
ES 1000
EN
35