Dispensing Hot Water; Personalised Drinks - Siemens CT636LE serie Gebrauchsanleitung

en

Dispensing hot water

F
If coffee is not dispensed within
90 seconds, the brewing chamber
empties automatically to avoid an
overflow The appliance is then
rinsed
Place a cup underneath the beverage
outlet
Using the rotary selector, select a coffee
drink or a coffee drink with milk
The display shows the selected drink along
with the preset values for this drink
F
The settings can be changed
as described in the section
"Drink adjustment"
For coffee drinks with milk, please
observe the instructions in the
section "Preparation using milk"
Press C to start dispensing
The coffee is brewed and then dispensed
into the cup When selecting coffee drinks
then the coffee brewed
F
For another drink with ground coffee,
repeat the procedure
Dispensing hot water
B
Risk of burns!
The beverage outlet gets very hot
After use, always let it cool down
before you touch it
The appliance must be ready for use
container
the outlet
Place a cup or glass underneath the
beverage outlet
Select "Hot water" with the rotary
selector
F
The settings can be changed
as described in the section
"Drink adjustment"
Press C to start dispensing
The message appears "Milk tube
removed from milk container?"
42
EURO Appliances - euappliances.info
If still connected, remove the milk tube
and touch [ Yes ] on the display
Press button C again to stop the
procedure prematurely

Personalised drinks

Press B to open the selection for per-
sonalised drinks
Up to 8 storage spaces can be used Save
your favourite drinks that are frequently
dispensed here with all their settings
F
Press B to exit the menu
without saving at any time
Entering or changing drinks
Press B
The selection of memory locations appears
myCoffee 1
Using the rotary selector, choose an
empty memory location (empty cup)
to make a new entry, or an occupied
memory location to change or delete a
favourite drink
At an empty memory location
[ Create beverage ] or an occupied
memory location [ Change beverage ]
F
If [ Delete beverage ] is selected, the
settings for the memory location are
deleted and it is again empty
The menu for adjusting the drinks opens
The last drink dispensed is shown with the
last settings selected
If you do not wish to save last drink
dispensed, select another drink with the
rotary selector
Touch each setting to be changed and
adjust the values as desired with the
rotary selector
Other setting options appear depending on
the selection
Create beverage