Using The Appliance; Brewing Coffee - Philips HD7696 Bedienungsanleitung

ENGLISH
8
If you select a keep-warm time over 30 minutes, the freshness indicator will be activated after
30 minutes. The slowly flashing on/off button lets you know the freshness of your coffee is declining.
Freshness indicator
To switch off the freshness indicator, follow below steps.
1 Unplug the appliance.
2 Press and hold the on/off switch and put the plug back in the wall socket.
The display shows OFF.
,
To switch on the freshness indicator, follow below steps.
1 Unplug the appliance.
2 Press and hold the on/off switch and put the plug back in the wall socket.
The display shows ON.
,
Flushing the appliance before first use
1 Remove the water tank from the appliance (1) and remove the lid of the water tank
(2) (Fig. 6).
2 Fill the water tank with fresh, cold tap water (Fig. 7).
3 Put the lid on the water tank (1) and put the water tank back onto the appliance (2) (Fig. 8).
Do not put a filter and ground coffee in the filter holder.
4 Press the on/off switch downwards to switch on the appliance (Fig. 9).
5 Let the appliance operate until the water tank is empty.
6 Press the on/off button downwards to switch off the appliance (Fig. 10).
7 Clean the jug and the filter holder (see chapter 'Cleaning'). (Fig. 11)
8 Let the appliance cool down for at least 3 minutes before you start brewing coffee.

Using the appliance

Brewing coffee

This appliance is equipped with an AromaSelect knob which allows you to adjust the strength of
the coffee to your own taste. You can experiment with the AromaSelect to find the strength that
you like best.
1 Make sure the plug is in an earthed wall socket.
2 Make sure the jug is under the filter holder.
3 Set the coffee strength you prefer with the AromaSelect knob. (Fig. 12)
To choose the coffee strength, turn the knob to the preferred position: mild, regular or intense.
4 Remove the water tank and fill it with fresh, cold tap water (Fig. 13).
The level indications correspond to small cups of 80ml and large cups of 120ml.
5 Put the lid on the water tank (1) and put the water tank back onto the appliance properly
(2) (Fig. 8).
6 Take a paper filter (type 1x4 or no. 4) and fold the sealed edges to prevent tearing and
folding (Fig. 14).
7 Open the filter holder lid (1) and put a paper filter in the filter holder (2) (Fig. 15).