Philips HD7696 Bedienungsanleitung Seite 12

ENGLISH
12
Problem
The coffee is too strong.
The appliance takes a long
time to brew coffee.
The appliance produces a lot
of noise and steam during
the brewing process.
The coffee is not hot enough. Make sure you place the jug onto the hotplate properly.
The appliance does not keep
the coffee warm long
enough.
The on/off switch flashes.
The CALC indication
appears on the display.
I cannot turn the
AromaSelect knob.
Solution
Set the AromaSelect knob to mild.
Use less ground coffee or more water.
Descale the appliance (see chapter 'Descaling').
Descale the appliance (see chapter 'Descaling').
Use thin-walled cups. Thin-walled cups will absorb less heat from
the coffee than thick-walled cups.
Descale the appliance regularly (see chapter 'Descaling').
The default setting for keeping the coffee warm is 30 minutes.
After 30 minutes the appliance switches off automatically to save
energy. You can adjust the keep-warm time (see chapter 'Preparing
for use', "Adjustable keep-warm and freshness indicator').
If you select an adjustable keep-warm time over 30 minutes, the
built-in freshness indicator in the on/off switch starts to flash after
30 minutes to remind you that the freshness of the coffee is
declining.
You pressed and held the on/off switch for more than 4 seconds.
This made the appliance start the descaling procedure. During this
procedure, the word CALC is visible on the display (see chapter
'Descaling').
Please descale the appliance (see chapter 'Descaling').