Original Accessories/Auxiliary Equipment; Safety Guidelines For Battery Chargers; Before Use; Charging The Battery Pack (See Fig. A) - Parkside PABS 20-Li D5 Originalbetriebsanleitung

Original accessories/auxiliary
equipment
■ Use only the accessories and additional
equipment which are specified in the operating
instructions and are compatible with the
appliance.
WARNING!
■ Do not use any accessories which are not
recommended by PARKSIDE. This can lead to
an electric shock and fire.
Safety guidelines for battery
chargers
This appliance may be used by chil-
■
dren aged 8 years and above and
by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Children must
not play with the appliance. Clean-
ing and user maintenance tasks
may not be carried out by children
unless they are supervised.
The charger is suitable for
indoor use only.
WARNING!
■ To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer or the manufacturer's customer service
department or a similarly qualified person.
ATTENTION!
♦ This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/PAP 20 A3.
♦ A current list of battery compatibility can be
found at www.lidl.de/Akku.
│ GB │ IE
■ 20

Before use

Charging the battery pack (see fig. A)
CAUTION!
► Always pull out the plug before you remove
the battery pack
battery pack to the charger.
NOTE
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C.
♦ Connect the battery pack
battery charger
♦ Insert the power plug into the socket. The
control LED lights up red to indicate that the
appliance is charging.
♦ The green control LED
charging process is complete and the battery
pack is ready.
♦ Insert the battery pack
appliance (see Fig. B).
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack
♦ Push the rotation direction switch
middle position (lock) (see Fig. C). Allow
the battery pack
(see Fig. B).
Removing the battery pack
♦ Press the release button
battery pack (see Fig. D).
from or connect the
to the rapid
(see Fig. A).
indicates that the
back into the
into the
to click into the handle
and remove the
PABS 20-Li D5