Operation Mode - A&D UA-851 Bedienungsanleitung

1. Normal Measurement With Storing Data
Press the START button. Blood pressure is measured and data are stored
within the device. The device can store the last ninety sets of data in
memory automatically.
2. Recalling The Data
When nothing is displayed, press and hold the
START button. After all of the display segments, the
average of the stored data is displayed. Release the
START button
Then, the data number of the most recent
measurement and the data are displayed.
Automatically the older data are displayed in turn.
3. Clearing The Data
The stored data are cleared when the batteries are removed
or drained.
4. Measurement With The Desired Systolic Pressure
Refer to page 10 for measurement with a desired systolic pressure.

Operation Mode

(Refer to page 11)
(Refer to page 11)
English 5
(Refer to page 9)
Press and hold
Average
Release
the START button
Data number
Stored Data
START