Using The Monitor; Installing / Changing The Batteries; Connecting The Air Hose; Connecting The Ac Adapter - A&D UA-851 Bedienungsanleitung

Installing / Changing The Batteries

1. Slide the battery cover to open it.
2. Remove the used batteries and insert
new batteries
compartment as shown, taking care that
the polarities (+) and (-) are correct.
3. Slide the battery cover to close it.
Use only R6P, LR6 or AA batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If not, the device will
not work.
When (LOW BATTERY mark) blinks on the display, replace all batteries with
new ones. Do not mix old and new batteries. It may shorten the battery life, or
cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
Battery life varies with the ambient temperature and may be shorter at low
temperatures.
Use the specified batteries only. The batteries provided with the device are for
testing monitor performance and may have a limited life.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
The stored data are cleared when the batteries are removed or drained.

Connecting The Air Hose

Insert the air connector plug into the air
socket firmly.

Connecting The AC Adapter

Insert the AC adapter plug into the DC jack.
Then, insert the AC adapter into an
electrical outlet.
The AC adapter, the model TB-233, is
sold separately.

Using The Monitor

into the battery
English 6
Step 2
Step 1
Step 3
Air socket
Air connector plug
DC jack
AC adapter plug