How To Take Proper Measurements; Measurement; After Measurement - A&D UA-851 Bedienungsanleitung

How To Take Proper Measurements

For the most accurate blood pressure measurement:
Sit comfortably at a table.
Rest your arm on the table.
Relax for about five to ten minutes before measurement.
Place the center of the cuff at the same height as your heart.
Remain still and keep quiet during measurement.
Do not measure right after physical exercise or a bath. Rest for twenty or
thirty minutes before taking the measurement.
Try to measure your blood pressure at the same time every day.

Measurement

During measurement, it is normal for the cuff to feel very tight. (Do not be
alarmed).

After Measurement

After measurement, press the START button to turn off the power. Remove
the cuff.
Note: The device has an automatic power shut-off function, which turns the
power off automatically one minute after measurement.
Allow at least ten minutes between measurements on the same person.
Using The Monitor
English 8