1. Normal Measurement With Storing Data
Press the START button. Blood pressure is measured and data is stored
within the device. The device can store the last thirty sets of data in
memory automatically.
2. Recalling The Data
Press and hold the START button to recall the
data. Stored data are automatically displayed in
order from the last data.
The device can store the last thirty sets of data
in memory automatically.
3. Clearing The Data
Remove batteries to clear all data. Re-install them again.
4. Measurement With The Desired Systolic Pressure
Refer to page 9 for the measurement with a desired systolic pressure.
Operation Mode
English 5
( Refer to page 8)
Press and hold
Data number
Alternation
Stored Data