Idegis D-10 Bedienungsanleitung Seite 49

5.4. TEST OF WATER SALINITY
We can verify at any time the salinity level of the swimming pool water. It will be
enough to carry out the following procedure:
Select power level
This procedure is valid for both MANUAL and AUTO modes. In AUTO MODE
(green blinking LED) the system will automatically return to the previous power
level when the next polarity change takes place, whereas if system is running in
MANUAL MODE (fixed green LED), we will have to select manually the desired
power level.
Check that water temperature is in the range 25-30ºC.
Once the system is at power level
a qualitative way, the salinity level of the water.
using the keys
AUTO Mode
("UP" ) and
MANUAL Mode
, he production indicator will show in
("DOWN").
14