Idegis D-10 Bedienungsanleitung Seite 44

ALARMS
Overload: this led blinks when the power
supply reaches an overload level for whatever
reason (excess of salt and/or temperature, short
circuit, etc.). The built-in digital control system will
automatically set the output power level in a lower
one. In case the overload condition persists in all
the levels, the output current to the electrolysis cell
will be turned off.
Level: this led blinks when a gas bubble has
been formed inside the cell. The power supply will
remain disconnected until the water flow through
the cell is restored or gas bubble is removed (see
section 2.2)
ELECTRODE SELF-CLEANING SYSTEM
Direct: this led indicates that the electrodes are
polarized directly.
Reverse: this led indicates that the electrodes
are reversely polarized.
9
Power supply connections