Südwind AMBIENTIKA SOLO Handbuch Für Installation Und Wartung Seite 72

INSTRUCTI NS F R R
N
Speed selection
Switching n ff 0
Start up
nce the product is installed b
turning the switch 0
Make sure that the luminous indicator is on.
nce the shutter is open, the product starts its normal operation with the exchange c cle of 0
seconds of air inlet - 0 seconds of air extraction.
2 Speed selection
It is possible to increase or decrease the air exchange flow b means of the
the product side.
Select speed for more silent air exchange.
Select speed 2 for faster air exchange.
Wall controls
In the event that, during installation carried out b
selection commands have been controlled from the wall, make sure that the controls on the
product are both turned on
he instructions for remote control on the wall are identical to those of the product, mentioned
above.
4 urning the product off
Set the switch 0
If the commands have been carried out on the wall, set the wall switch on 0 . Keep the
switch, placed on the product side, in the
24
ER ER TI N
2
ualified personnel, proceed with the first start of the product, b
, placed on the side of the main unit, on.
.
, placed on the product side, on 0 .
ualified personnel, the
position.
2 switch, placed on
n ff and speed
n ff