Südwind AMBIENTIKA SOLO Handbuch Für Installation Und Wartung Seite 59

2a) S L RSI
DIR C C C I
Before proceeding with connection, make sure that the power suppl cables line and neutral are
present in the area speciall formed in the wall.
C C I WI H H R M
It is also possible to switch the wall
ollow the instructions of paragraph DIR C C
the electrical grid.
o operate the product through recessed switches, it is necessar that , during operation, the
switches on the product are alwa s turned on , as shown in the image
o turn the product on via wall switch, connect a bipolar switch in series to the L and
extremities, as shown in the image a .
he connections should be implemented as follows
xtract the particular internal wall mounting 4i and the tools
necessar for connecting the power suppl network with the
stripped wires provided in the special compartment.
Connect, in an appropriate and safe manner, the network
power suppl cables with those from the terminal block.
Indications and L .
C R LL R
commands and select speed remotel .
C I related to the modes of connection to
.
11