Südwind AMBIENTIKA SOLO Handbuch Für Installation Und Wartung Seite 61

2b) D C D RSI
P W R S PPL C
Before proceeding with connection, make sure that the power suppl cables line and neutral are
present in the area speciall formed in the wall.
Make the connections like in the image below
C I
xtract the particular internal wall mounting 4i and the tools
necessar for connecting the power suppl network with the
stripped wires provided in the special compartment.
Connect, in an appropriate and safe manner, the network
power suppl cables with those from the terminal block.
Indications
It is possible to switch the wall
speed remotel . o operate the product through recessed
switches, it is necessar
on the product are alwa s turned on , as shown in the image
.
o turn the product on via wall switch, connect a bipolar
switch in series to the L and
image a .
It is also possible to connect the product to the home
automation network, b serializing the power suppl so as to
enable the on-off programming.
and L .
that , during operation, the switches
extremities, as shown in the
commands and select
13