Südwind AMBIENTIKA SOLO Handbuch Für Installation Und Wartung Seite 64

2c) WIR L SS RSI
P W R S PPL C
Before proceeding with connection, make sure that the power suppl cables line and neutral are
present in the area speciall formed in the wall.
In case of installation of several products in the M S R-SL
order to achieve optimal communication between various units, make sure that the
maximum distance of 20 m between one device and the other is maintained. he t pe of
walling material eg. bricks, reinforced concrete , ma influence the distance.
Make the connections like in the image below
16
C I
xtract the particular internal wall mounting 4i and the
tools necessar for connecting the power suppl
network with the stripped wires provided in the special
compartment.
Connect, in an appropriate and safe manner, the
network power suppl cables with those from the
terminal block. Indications
It is possible to switch the wall
select speed remotel . o operate the product through
recessed switches, it is necessar that , during
operation, the switches on the product are alwa s
turned on , as shown in the image
o turn the product on via wall switch, connect a bipolar
switch in series to the L and
in the image a .
It is also possible to connect the product to the home
automation network, b serializing the power suppl so
as to enable the on-off programming.
configuration, in
and L .
commands and
.
extremities, as shown