Cardin Elettronica SL Serie Bedienungsanleitung Seite 89

TB FI TA TD
Encoder direction error. The gate movement direction is different from the encoder setting (eg. the gate moves in the closing
FS CP TC TAL
direction while the program is carrying out the opening stage). Check motor power supply connections.
ERROR DIR
TB FI TA TD
Current sensor error. When the gate is not moving this symbol means there is a problem with the current sensor.
FS CP TC TAL
ERROR SENS
SL
When the safety edge intervenes the gate will automatically invert for a few moments, both in the closing as well as
TB FI TA TD
FS CP TC TAL
the opening direction, to free the obstacle it will then stop for 3 minutes and then continue moving in the original direction
ACT. SAFETY EDGE
after a 10 second preflashing period has elapsed 10 s.
BL HL
TB FI TA TD
proceeds to the fully open position. If it intervenes during closing the gate automatically inverts travel direction for a few
FS CP TC TAL
ACT. SAFETY EDGE
centimetres and then stops to free the obstacle. After the pause time has elapsed the gate will move again in the closing direction.
SL
When the sensor intervenes the gate will automatically invert for a few moments, both in the closing as well as the
TB FI TA TD
opening direction, to free the obstacle it will then stop for 3 minutes and then continue moving in the original direction
FS CP TC TAL
INT. SENS
after a 10 second preflashing period has elapsed 10 s.
BL HL
TB FI TA TD
to the fully open position. If it intervenes during the closing direction the gate automatically inverts travel direction for a few
FS CP TC TAL
INT. SENS
centimetres and then stops to free the obstacle. After the pause time has elapsed the gate will move again in the closing direction.
If the safety edge intervenes during the opening direction the gate inverts the travel direction immediately and
If the sensor intervenes during the opening direction the gate inverts the travel direction immediately and proceeds
89