Setting The Date And Time - merten 5801 Gebrauchsanweisung

All functions can be selected and
adjusted as you require using set
mode.
Set mode is operated with four
buttons:
– [Set] Call up set mode, confirm a
selection
– [Mode] Selection and deselection
of various functions
– [▲] Scroll forwards
– [▼] Scroll backwards
From the basic display (current time),
press and hold the [Set] button until
prog appears in the display. The blind
time switch is now in set mode for
"Time/Date" (flashing dot next to "Uhr/
Dat.").
You can scroll back and forth between
the various setting options using the
[▲] and [▼] buttons. The
corresponding symbol flashes in the
display.
Press [Set] again when the setting you
want to change is shown. You can now
change the settings (see following
sections).
|
Note: If, whilst in set mode, you
do not press any buttons for
2 min, the device switches back
to the basic display. Any changes
made up to then will be saved.

Setting the date and time

You can exit set mode at any time by
pressing and holding the [Set] button
for about 3 sec. Any changes made up
to then will be saved.
Tip:You can select some values more
quickly by pressing and holding [▲] and
[▼]. The values will presently start to
change in larger steps.
Setting the date and time
1 Press and hold the [Set] button until
prog appears in the display.
The device is now in set mode. The
"Set date and time" lights flash on the
display.
2 Press the [Set] button.
3 Press [▲] or [▼] to set summer
time (S) or winter time (W).
4 To confirm, press [Set].
Prog Zufall Astro
Uhr
W
Dat.
Fig. 8: Setting summer time/winter
time
5 Press the [▲] or [▼] buttons to set
the current month (01–12).
6 To confirm, press [Set].
Mo
Di
Mi
Do
Fr
Sa
So
43