Remote Control Operation - Beko HCA62541W Anleitung

Control of hood operation
6
The hood control is equipped with a time switch
that disables the hood turbine after 15 minutes
from the switching on of the counter. The time
switch of the turbine does not disable the lighting
and the speed of the turbine can be freely
changed. To activate the time switch, the hood
turbine must work on any speed on the 1, 2, 3 or
intense gear. The timer is activated by holding
the symbol (for about 10 seconds), until a dot
starts to flash in the lower right corner. To disable
this feature, hold again the symbol (for about 10
seconds) or turn the hood off.
The hood control is equipped with a feature to
automatically turn off the turbine operation after
2 hours of inactivity of hood control.
The hood has a remote control (only selected
models) (Fig. 13)
Fig. 13 Remote control
Upper part of
remote control

6.4 Remote control operation

The turbine operation is
controlled with the upper
part of the remote control,
marked as
disabling the turbine is done
by pressing the button with
the symbol but also
speed is done by pressing the button
it by pressing the button
20 / EN
Bottom part of remote control
. Enabling/
and . Increasing
, reducing
.
6.5 Lighting control via
remote control
. The buttons and
The lighting is controlled
with the bottom part of
the remote control,
marked as . Enabling/
disabling the light is
done by pressing the
button with the symbol
are disabled.
Hood / User Manual