Cleaning - Noritsu IP-64 Bedienungsanleitung

may cause a malfunction. It is recommended that you
store the ink ribbon and paper roll in the package they
came in after you remove them.

Cleaning

Note
Be sure to turn off the power of the printer before
cleaning it.
When the cabinet becomes dirty
Clean the cabinet, panel and controls with a soft dry
cloth, or a soft cloth lightly moistened with a mild
detergent solution.
Do not use any type of solvent, such as thinner, absolute
alcohol or benzine or chemical cloth, which may
damage the finish.
Before you replace a paper roll with a new
one
Before loading a new paper roll after you have used up
one paper roll, perform the following cleaning
operation.
Use absolute alcohol for cleaning. Do not use any type
of solvent, such as thinner, benzine or chemical cloth,
which may deteriorate the quality of printouts.
Caution
Since the thermal head is still very hot just after printing
is finished, be careful not to touch the thermal head
when cleaning. Touching the thermal head may burn
you.
62
Precautions
To clean the thermal head:
Clean the thermal head heating elements, ribbon guide,
and the cleaning roller for the ink ribbon gently with a
soft cloth.
Thermal head heating elements
Cleaning roller for the ink ribbon
Ribbon guide
Clean area around the thermal head gently with a soft
cloth moistened with absolute alcohol.
Note
If you intend to use the printer just after you have
cleaned it, be sure to use it only after it has dried
completely.