Herunterladen Inhalt Inhalt Diese Seite drucken

Loading The Paper Roll And Ink Ribbon - Noritsu IP-64 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 104
Note
Hold the paper roll with both hands, because it is
heavy.
Insert this pink paper holder
into the side to which the
pink tape is attached.
To remove the pink tape
from the cut on the tape,
tear and pull the pink tape
after attaching the paper
holders. A part of the tape
remains inside the case of
the paper roll.
Push the knob of the
pink paper holder down
and turn it clockwise
until it stops. After the
pink paper holder is
securely connected to
the blue paper holder
already attached, this
knob will flow up and
down.
Now the paper roll is ready to be loaded into the
paper cartridge of the printer.
To confirm that the blue paper holder and the
pink paper holder are securely attached
Paper with 152-mm (6-inch) width: 2YNR-R154 and
2YNR-R156 Printing Pack
The concave portion on the
circumference of the blue
paper holder should be
aligned with the one on the
pink paper holder.
Paper with 127-mm (5-inch) width: 2YNR-R153 and
2YNR-R155 Printing Pack
The concave portion on the
circumference of the blue
paper holder should be
aligned with the one on the
pink paper holder.
Loading the Paper Roll and Ink
Ribbon
When you use the printer for the first time, load the
paper roll and ink ribbon.
Before loading the paper roll in the printer, be sure to
attach the blue and pink paper holders to the left and
right side of the paper roll.
For detailed information on how to attach the paper
holders, see "Attaching the Paper Holders to the Paper
Roll" on page 45.
For detailed information on how to remove the paper
and ink ribbon, see "Removing the Ink Ribbon and
Paper" on page 53.
Before loading the paper roll and ink ribbon
Confirm that the printer is powered on. If not, turn the
printer power on.
Otherwise, the automatic paper feeding may not be done
correctly after loading of the paper roll and ink ribbon is
completed.
Also, after you have used up one paper roll, clean the
thermal head and rollers before loading a new paper roll
and ink ribbon.
For detailed information on cleaning, see "Before you
replace a paper roll with a new one" on page 62.
Note
Do not use the 2YNR-R154 or 2YNR-R156 Printing
Pack with the 152-mm (6-inch) paper width after using
the 2YNR-R153 or 2YNR-R155 Printing Pack with the

Loading the Paper Roll and Ink Ribbon

47

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis