Noritsu IP-64 Bedienungsanleitung Seite 48

127-mm (5-inch) paper width. If you do so, picture
quality may deteriorate markedly.
To load the paper roll and ink ribbon
Cautions
• Be careful that your fingers or clothing are not pinched
or caught by the front door or the protuberance on the
front door.
• When ejected printouts are left on the paper tray,
remove them before opening the front door so that
they are not scratched or folded.
• Since the thermal head is still very hot just after
printing is finished, be careful not to touch the thermal
head when loading the paper and ink ribbon and be
careful not to damage the thermal head.
1
Pull the lock lever for the front door toward you to
open the front cover, and then pull the top cover.
48
Loading the Paper Roll and Ink Ribbon
C
Thermal head
2
Pull the lock lever for the ribbon base located on the
front of the ribbon base and pull up the ribbon base.
3
Pull the paper cartridge of the printer toward you.
Caution
Since the thermal head is still very hot just after
printing is finished, be careful not to touch the
thermal head when pulling the paper cartridge.
Touching the thermal head may burn you. Also, be
careful not to damage the thermal head.