Daily Operation - Lagrange Premium Gaufres Bedienungsanweisung

CORD
Examine the power cord carefully before using it. If it is damaged,
you must not use the unit. The cord should only be replaced by
, its after-sale service department or a qualified person
approved by in order to avoid danger for the user.
The cord used is a H RR-F G
05 3
These units are in compliance with directives
CE, DEEE 2002 / 96 /CE, RoHs 2002
regulation 1935 / 2004 .
ENVIRONMENT
Protection of the environment – DIRECTIVE
In order to protect our environment and our health,
electrical units at the end of their working lives must be
disposed of according to very specific rules requiring
the involvement of everyone, both suppliers and users.
That is why your unit, as indicated by the symbol on its nameplate,
must not be put into a public or private garbage can intended for
household wastes.
At the time of its disposal, it is your responsibility to bring your unit
to a public collection center designated for the recycling of electrical
and electronic equipment. If you need information about centers
for the collection and recycling of discarded units, please contact
the local authorities in your region, the household waste collection
services or the store where you bought your unit.
. mm².
0 75
/ /CE, /
2006 95 2004
/ 95 /CE and the CE food contact
/ /CE
2002 96
FIRST USE AND DAILY OPERATION
FIRST USE
We recommend cleaning the cooking plates before the first use
*
with a little hot water and a sponge. Dry thoroughly.
A new appliance may smoke slightly when used for the first time.
*
To reduce the chance of smoking, heat the appliance for
/
108
and then let cool for approximately half an hour.

DAILY OPERATION

Unroll the cord completely.
*
Plug the appliance in.
*
The green light comes on and the ready signal sounds to indicate
*
when the ideal cooking temperature has been reached. You may
then grease the plates and begin cooking (see Cooking Tips).
AFTER USE
To turn off the appliance, unplug the cord.
*
CHANGING PLATES
Unplug the appliance.
*
Allow it to cool completely.
*
Press the plate eject buttons immediately next to the plates.
*
Remove the plates and insert new plates.
*
68
minutes
10