Package Contents - Axis P3363-VE Installationsanleitung

AXIS P33-VE Network Cameras Installation Guide
AXIS P3363-VE/P3364-VE
Network Camera Installation Guide
Follow these instructions to install the network camera

"Package contents"

1.
"Hardware overview"
2.
"Install the hardware"
3.
"Assign an IP address"
4.
"Set the password"
5.
"Adjust the Lens"
6. on page 15
"Complete the installation"
7.
Notes:
• Before you begin, make sure that the package contents, power supply, and the required cables, tools, and
documentation are available. See
• This network camera is intended to operate with PoE; if not available use Axis PoE Midspan 1 port (not
included)
Package contents
Item
Network camera
with heating module
Mounting bracket
Dome covers
Weather shield
Labels
Mounting kit
CD
Printed Materials
Optional accessories
on page 5
on page 6
on page 7
on page 10
on page 13
on page 16
Package contents
Models/variants/notes
AXIS P3363-VE
AXIS P3364-VE
Clear transparent cover
Smoked transparent cover
2 adhesive serial no. labels
Resitorx screw driver, 2 long screws, drill template, 5-meter network cable
with gasket, 1 gasket, terminal block connector
AXIS Network Video Product CD including installation tools and other
software
Installation Guide (this document)
Axis Warranty Document
AVHS Authentication key
Threaded adaptor with cable shield
See www.axis.com for information on available accessories
Important!
This product must be used in
compliance with local laws and
regulations.
below.
Page 5