Axis P3363-VE Installationsanleitung Seite 14

Page 14
7. Select the power line frequency
in your location from the drop-down list the first
time network camera is accessed.
Note:
Power line frequency can be changed from Plain Con-
fig or by resetting the product to factory default.
Selecting the wrong frequency will cause image flicker if the product is used in fluorescent light
environments. When using 50 Hz, the maximum frame rate is limited to 25 fps.
Access the video stream
The Live View page of the network camera is displayed. The Setup link leads to menus which allow
you to customize the camera.
Note:
To install AMC in Windows 7/Windows Vista, you must run Internet Explorer as an administrator.
Right-click the Internet Explorer icon and select Run as administrator.
AXIS P33-VE Network Cameras Installation Guide
used
(50 Hz or 60 Hz)