®
ABIPLAS
WELD 100/150 POWDER W
Fault
Powder is introduced
unilaterally
Tab. 14
Troubleshooting
11 Disposal
BAL.0086 • 2017-05-24
Cause
• Powder nozzle bore partly
clogged
• Powder gas volumetric flow too
strong or too weak
NOTICE
• Do not dispose of the device with household waste.
• For disposal, observe the local regulations, laws, provisions, standards
and guidelines.
11 Disposal
Troubleshooting
• Clean powder nozzle and
replace it if necessary
• Adjust powder gas volumetric
flow setting
EN - 23