urmet 1092/679 Schnellanleitung Seite 18

6 OPERATION AT POWER-UP
The camera employs the default settings the first time it is switched on. Changes to the settings will be permanently
stored and will be made available the next time the camera is switched on. You can return to the default settings by
means of the appropriate menu option at any time.
The camera will work as follows when it is switched on.
1. The camera will run a calibration procedure and a message showing the following information will appear on the
video output OSD (On Screen Display): protocol, communication parameters, camera address and software
version.
Check that the data are suitable for operation.
Otherwise, refer to the section in this document that shows how to install the camera correctly.
3. After calibration, the camera awaits for password input
Settings as configured on FUNCTION PROGRAM → MOTION→POWER ON ACTION menu. This mode
remains unchanged until a different command is given from the keyboard. For instance, in this phase the
camera can point at fixed point or scan the visibility area. For further details please refer to menu POWER ON
ACTION detailed description.
6.1 FUNCTION PROGRAMMING MENU
Use the following 1092/621 - 1092/693 control panel command to access the function programming menu.
95 + SHOT (1092/621)
At this point, if no password is required for access, the following first level menu will appear on the screen:
Otherwise, if a password is required, the following prompt will appear.
To scroll the menu items simply use the joystick moving it vertically and placing the cursor onto the menu item to be
selected: now either use the OPEN (1092/621)or IRIS+ (1092/693) controls or move the joystick to the right to
enter the second level menu you selected.
Once you entered a menu, simply use CLOSE (1092/621)or IRIS-(1092/693)controls (also displayed as IRIS – in
the menus) to go back to the previous level menu.
DS1092-233
EASY DOME 1092/679
CAMERA: CTU20AM108
ADDRESS: 1
BAUDRATE: 2400
PROTOCOL: AUTO
VERSION: 1.0
S/N: 064501
INITIALIZING
or SHOT + 95 (+ ENTER) (1092/693)
EASY IV 1092/679
1 Language
2 Dome Information
3 Display Options
4 Control Options
5 Camera Options
6 Function Program
7 System Setup
8 Exit
English
18