Connection To 5.1-Channel Surround Sound System - Denon DVD-1920 Bedienungsanleitung

CONNECTIONS

Connection to 5.1-channel Surround Sound System

Analog 5.1-channel audio signals can be output from the DVD player.
The multichannel audio signals recorded in packed PCM and the multichannel Super Audio CD can be played
back when an AV amplifier equipped with analog 5.1-channel audio inputs is connected.
Center speaker
Front speaker
(left)
AV amplifier
Surround
speaker
5.1-channel
(left)
audio input jacks
NOTES:
• For 5.1-channel connections, set ANALOG AUDIO to MULTI CHANNEL in the setup mode and adjust Speaker Configuration,
DELAY TIME and CHANNEL LEVEL settings (refer to pages 29-31).
• You can enjoy high-quality analog sound by cutting off the video signal. Press the PURE DIRECT button on the front panel.
Front speaker
Surround
with
speaker
(right)
AUDIO
(right)
Subwoofer
DVD
– 14 –
To 5.1-channel
Audio Input
Jacks
Speaker
Cable
(commercially
available)
5.1ch
AUDIO OUT
EN