Fine Tuning The Instrument - Korg SV-1 Anleitung

F
INE TUNING THE INSTRUMENT
You can fine tune the instrument, to adapt to another instrument that cannot be tuned.
Press the FUNCTION button.
1.
After you press the FUNCTION button, its LED starts blinking. Also, one of the
LEDs around the TREBLE knob in the EQUALIZER section starts blinking.
Use the TREBLE knob to edit master tuning. By default, the SV-1 is tuned to the
2.
standard Western tuning (A = 440Hz). Use the TREBLE knob to change this, by
lowering or raising the pitch of 0.25Hz per each click of the knob. The LEDs
around the knob show the nearest value of the pitch detuning.
To restore tuning to the original A = 440Hz, press the TREBLE knob.
3.
NOTE: When the instrument is turned off, the fine tuning is reset.
HINT: You can edit the fine tuning by using the Master Tune function in the SV-1 Editor, and
memorize it by choosing the Write Global command.
Advanced settings | Fine tuning the instrument – 27