Korg SV-1 Anleitung Seite 27

MODULATION FX section
Here you can select a modulation effect. This selects one of six modulation effect mod-
els. After selecting an effect with the TYPE knob, you can use the SPEED and INTEN-
SITY knobs to adjust the effect parameters. To reset a parameter to the default value,
press the corresponding knob. Effects are placed after the amp and cabinet model.
The SLOW/FAST button switches the speed of the rotary effect.
NOTE: The parameters will be initialized when you select a different preset.
REVERB/DELAY section
Here you can select a reverb, delay or echo effect. This selects one of four reverb, one
echo, or one delay effect models. After selecting an effect with the TYPE knob, you can
use the DEPTH knob to adjust the effect's intensity. To reset it to the default value,
press the DEPTH knob. Effects are placed after the amp and cabinet model, and after
the modulation effect.
In case the stereo delay effect is selected, you can 'tap' its time on the TAP button.
NOTE: The parameters will be initialized when you select a different preset.
POWER switch
Use this switch to turn the power on/off.
B
Controls and connections | Front panel – 13
C D