Hitachi UHD 75 serie Handbuch Seite 17

Audio Video
Sharing
Video Wall
Settings
Speakers
DP Stream
Setting (*)
Signage Settings Menu Contents
Device Info
Set ID
Software
upgrade
Serial number
Model name
Save model
information
Temperature
Settings
Display Life Time
Controls
OSD Orientation
Pixel shift
No Signal
No Signal Delay
Audio Video Sharing feature allows you to share files stored on your smartphone or
tablet pc. If you have a compatible smartphone or tablet pc and the appropriate software
is installed, you can share/play photos on your Display. See instructions of your sharing
software for more information.
Press OK to open the Video Wall Settings menu screen. Row Count, Column Count,
Cell and Offset options are available.
To hear the Display audio from the connected compatible audio device set as
Amplifier. You can use the remote control of the Display to control the volume of the
audio device.
Sets the DisplayPort stream type.
(*) This menu item appears only when the input source is set to DP.
Sets the device ID. You can select a value between 0-99 using the numeric buttons
on the remote in order to identify your Display.
Displays current software version. Press OK to see the Upgrade options menu. You
can use these options to start a manual search for software updates and set your
automatic scan preference.
Displays serial number of the unit. (Cannot changed by user)
Displays model name of the unit. (Cannot changed by user)
Copies the model information data of the unit to a connected USB device.
Press OK to open the Temperature Settings menu screen. Current system temperature
will be displayed. You can also change the maximum system shutdown temperature
using the related option.
Note: This feature may not be available depending on the model of your unit.
Displays the duration of life of the unit.
Sets the OSD (On Screen Display) rotation of your Display. Landscape and Portrait
options are available.
Enables or disables pixel shifting. This option can be used to avoid image retention (after
image effects) that can occur when displaying fixed patterns or still images for a long
periods of time. If enabled, the picture and OSD (On-Screen Display) will be shifted at
specified time intervals.
Sets the behavior preference of the Display, when no signal is detected from the currently
set input source. Failover and Input Search options are available.
If Failover is selected the Display checks the connected USB device for available files to
play. If no playable files are available or there is no USB device connected to the Display,
the No Signal image will be displayed. If there isn't any No Signal Image available, No
Signal OSD will be displayed on the screen. The setting of the Auto Play option in the
Media Browser>Settings menu is not important, in Failover mode it will function anyway.
If Input Search is selected the Display will search all available input sources consecutively
to find signal. If no signal is detected from other available sources, No Signal OSD will
be displayed and the Display will turn itself off after a period of 30 seconds.
Sets a delay value to the 'No Signal' preferences when the Display is in No Signal state.
After the set delay time is expired 'No Signal' preferences will be applied.
English - 16 -
MST and SST options are available.