Universal Adapter; Flexi Crevice Nozzle - Silvercrest SUSA 4 A1 Bedienungsanleitung

5. Universal adapter

The universal adapter can be mounted on
many commercially available vacuum clean-
er pipes with a diameter of approx. 30 - 40
mm. All of the vacuum cleaner attachments
from this set can be attached to the mini suc-
tion pipe 9.
Fastening the Universal adapter
1. Unscrew the screw ring 12 and the mini
suction pipe 9 a little (not completely)
anticlockwise.
2. Figure B: plug the universal adapter 1
with the screw ring 12 onto the suction
pipe on your vacuum cleaner.
3. Tighten the mini suction pipe 9 clock-
wise.
4. You can attach all vacuum cleaner at-
tachments of this set to the mini suction
pipe 9.
Removing the universal adapter
1. If necessary, pull off any fixed vacuum
cleaner attachment from the mini suction
pipe 9.
2. Unscrew the mini suction pipe 9 slightly
(not completely) anticlockwise until the
universal adapter 1 can be removed
from the suction pipe.
4
GB
Assembling the universal adapter
If you have screwed the screw ring 12 and
the mini suction pipe 9 completely apart,
put them together again (Figure A):
1. Insert the elastic plastic ring 11 into the
screw ring 12.
2. Place the hard plastic ring 10 on the
elastic plastic ring 11 in the screw
ring 12.
3. Screw the mini suction pipe 9 clockwise
onto the screw ring 12.
12

6. Flexi crevice nozzle

The flexi crevice nozzle 8 is particularly
long and flexible. It can be used with or
9
without a brush head 2.
The flexi crevice nozzle is particularly suita-
ble for narrow, hard to reach areas (e.g. be-
hind furniture, behind radiators) or for the
removal of cobwebs on the ceiling.
• Plug the flexi crevice nozzle 8 onto the
universal adapter 1 that you have at-
tached to the suction pipe of your vacu-
um cleaner.
Brush head
• Depending on the intended use, you
can attach the brush head 2 to the flexi
crevice nozzle 8 or remove it.