GB
After use, the power cable can be wound up onto the hook (19).
5.2 Fitting the fi lter
Never use the wet and dry vacuum cleaner without a fi lter!
Always ensure that the fi lters are perfectly secure!
Fitting the foam fi lter (Fig. 8a)
For wet-vacuuming, slip the supplied foamed plastic fi lter (15)
over the fi lter basket.
Fitting the additional fi lter (Fig. 3/8b)
For dry vacuum cleaning always use the supplied additional
fi lter (18). Mount the additional fi lter, so that no air is sucked
through the fi lter cage (4) without being fi ltered.
Assembling the dirt bag (Fig. 9)
For vacuuming fi ne, dry dirt it is recommended that you fi t the
dirt bag (14). Slip the dirt bag (14) over the vacuuming hole. The
dirt bag (14) is suitable for dry-vacuuming only. The dirt bag ma-
kes it easier to dispose of the sucked-in dust.
5.3 Fitting the suction hose (Fig. 2/3, 10, 11)
Connect the suction hose (10) to the corresponding connector
on the wet and dry vacuum cleaner, depending on the applica-
tion required.
Vacuuming
Connect the suction hose (10) to the suction hose connector (8)
Blowing
Connect the suction hose (10) to the blow connector (9)
- 24 -