Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem
The appliance is connected to the
mains, but does not operate.
The unit seems to generate
insufficient cooling power.
Abnormal noise can be heard
during operation.
Transporting the unit
The unit must be transported only in its vertical position.
Do not tilt it to more than 45°.
During transport, ensure that the unit is properly secured and protected against damage.
To ensure optimum performance, wait a minimum of 2 hours after transporting the unit before
connecting it to the mains.
Disposal
This appliance has been manufactured from recyclable materials. After removing the plug
from the wall socket, the unit should be rendered unusable by cutting off the power cord
before being disposed of through special waste collection points in accordance with local
regulations. The refrigerant and the chemical agent in the insulation foam must be disposed of
through a competent agency. Take special care not to damage the cooling circuit before the unit is
handed over for competent disposal.
Guarantee
This product is guaranteed against defects in materials and workmanship for a period of two years
from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace
any parts found to be defective, providing the product is returned to one of our authorised service
centres. This guarantee is only valid if the appliance has been used in accordance with the
instructions, and provided that it has not been modified, repaired or interfered with by any
unauthorised person, or damaged through misuse.
This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic
items, bulbs etc. This guarantee does not affect your statutory rights, nor any legal rights you may
have as a consumer under applicable national legislation governing the purchase of goods. If the
product fails to operate and needs to be returned, pack it carefully, enclosing your name and address
and the reason for return. If within the guarantee period, please also provide the guarantee card and
proof of purchase.
Information needed by the Customer Service
Should repairs to the appliance become necessary, please contact our Customer Service, providing a
detailed fault description and quoting the model number KS ... on the rating plate of the appliance
Possible cause and solution
The wall socket has no power, or there are contact problems.
Check the wall socket and the plug.
Check whether
–
too much food has been stored in the unit.
–
the thermostat is set to position 'MIN' (in this case, set it to
a suitable higher value).
–
the door is not properly closed.
–
there is too much dust on the condenser.
–
the unit is too close to a wall or other object at the rear or
to the sides.
Either the unit has been improperly set up (e.g. on an uneven
floor) or there is contact between the rear-mounted cooling
circuit and the power cord, the wall or other object or surface.
23
Werbung
