Familiarisation
1. Temperature control
2. Hinged flap
3. Pull-out freezer drawer
4. Ice-cube tray (inside the drawer)
5. Bottom freezer drawer
6. Adjustable feet
7. Door
Before using for the first time
Ensure that the following accessories are included
with the appliance:
1 door handle
2 screws
2 screw covers
1 hinge opening cover
1 ice-cube tray
–
Remove any exterior and interior packaging materials completely, including the adhesive strips
and any transport locks or protection devices.
–
To install the door handle, remove both of the blind covers. Fit the door handle using the two
screws and fit the screw covers.
–
For positioning, we recommend that you tilt the unit slightly backwards. In this way, the
transport rollers can be used to move it to its intended place of installation.
–
Before it is connected to the mains, the unit must be thoroughly checked for transport damage,
including its power cord.
–
Clean the unit according to the instructions given in the De-frosting and cleaning section.
–
To ensure proper functioning, wait for around 2 hours before connecting the unit and switching
it on once it has been positioned.
–
When the unit is first switched on, a slight smell may be noticed. However, this will disappear
once the cooling process has begun.
16