Adjusting Suction Power - Philips Studio FC9080 Serie Bedienungsanleitung

EnglISh
1

adjusting suction power

On appliance (specific types only)
1 During vacuum cleaning, you can adjust the suction power with the
selection wheel on top of the appliance.
- Use maximum suction power to vacuum very dirty carpets and hard
floors.
- Use minimum suction power to vacuum curtains, tablecloths etc.
On remote control (specific types only)
1 During vacuuming, you can adjust the suction power level with the
– and + buttons on the remote control.
- Use maximum suction power to vacuum very dirty carpets and hard
floors.
- Use minimum suction power to vacuum curtains, tablecloths etc.
Pausing during use (specific types only)
1 If you want to pause for a moment, press the on/off/standby button
on the remote control to switch off the appliance temporarily.
 To continue vacuum cleaning, simply press the on/off/standby button
on the remote control again.
Storage
1 Switch off the appliance and remove the mains plug from the wall
socket.
Downloaded from www.vandenborre.be