EnglISh
16
1
Pull the cover upwards to open it.
Lift the dustbag holder out of the appliance.
Make sure you hold the dustbag upright when you lift it out of the
appliance.
Pull at the cardboard tag to remove the full dustbag from the holder .
When you do this, the dustbag is sealed automatically.
,
Slide the cardboard front of the new dustbag into the two grooves of
the dustbag holder as far as possible.
5
Put the dustbag holder back into the vacuum cleaner.
Note: If no dustbag has been inserted, you cannot close the cover.
6
Push the cover downwards to close it.
Downloaded from www.vandenborre.be